64
Configuring Motion Detection Settings
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
(Send Backward)
Use this button to move the selected area down one
level in a stack of overlapping areas.
(Remove Polygon)
Use this button to delete the selected area.
(Refresh Image)
Use this button to refresh the still image that includes
all the areas.
(Preview)
Use this button to displays a live image from the
camera that includes the video motion detection areas.
This allows you to confirm how the configured areas
appear.
I
Area Mode
Select whether to detect motion inside or outside the
configuration area.
To detect motion inside the configuration area, select
[Include], and to detect motion everywhere outside the
configuration area, select [Exclude].
Display Color
Click the box, and select a fill color for the motion
detection frame in the dialog box that appears.
Threshold
Set a value from 1 to 100 as the threshold for motion
detection.
J
Expert Mode
Select the check box to configure advanced settings.
If this check box is selected, the following items can be
configured.
Previous Frame
Specify, the number of frames for the number of
images to compare as a basis for determining that an
object has moved.
Using the specified frames, NSR delegates frames as
candidates for detection and performs noise reduction.
Setting this number high facilitates noise reduction,
but processing speed decreases as a result of the
increase in the processing load.
Candidate Frame
Based on this value, NSR configures the number of
times a determination needs to be made for a candidate
image to be detected as moving.
Block Size X
Specify the horizontal length of the detection area in
pixels.
Block Size Y
Specify the vertical length of the detection area in
pixels.
Max Object Size X
Specify the maximum horizontal length of the object
as a percentage.
Max Object Size Y
Specify the maximum vertical length of the object as a
percentage.
Min Object Size X
Specify the minimum horizontal length of the object as
a percentage.
Min Object Size Y
Specify the minimum vertical length of the object as a
percentage.
Min Objects For Alarm
Specify the minimum number of detected objects for
sending notification of an alarm.
K
Apply
This saves the settings.
L
Cancel
This cancels the changes to the settings.
M
Close
This closes the screen.
Using the Motion Detection Function
of the Camera (VMD (Camera))
To use the motion and object detection functions by
camera (VMD (camera)), use the procedure below to
configure the VMD (camera) pin, and motion detection
and object detection areas.
The setting items for the motion detection and object
detection areas differ depending on the camera you are
using.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
Caution
Summary of Contents for Ipela NSR-1050H
Page 138: ......
