75
Configuring Settings Related to Storage
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
I
Close
This closes the screen.
Setting Items of [Storage Assign] Tab
This tab is displayed by clicking [Server] in the
[Configuration] window, and clicking the [Storage
Assign] tab.
After configuring each item, click [Apply].
A
Storage Mode
Select the method for specifying recording data for saving
to storage.
The setting items vary depending on this selection.
Record Type
Select this to specify storage for each recording type,
such as schedule recording and alarm recording.
Camera
Select this to specify storage for saving recording data
for each camera.
x
To assign storage for each recording type
B
Record Type and Storage
Select storage for each recording type.
Manual Record
Select storage for saving for manual recording.
Schedule Record
Select storage for saving for schedule recording.
Alarm Record
Select storage for saving for alarm recording.
Event Record
Select storage for saving for event recording.
C
Apply
This saves the settings.
D
Cancel
This cancels the changes to the settings.
E
Close
This closes the screen.
x
To assign storage for each camera
B
Default Storage
Select the default save location for recording data.
C
Storage for Each Camera and Record
Specify storage for each camera and recording type.
Click the setting item, and select from the list that appears.
Camera
This displays a list of the cameras registered to NSR.
This item cannot be changed.
All Record Type
Select storage for when recording the recording data of
all recording types to one storage.
When specifying storage for each recording type,
select [Select Each].
Manual Record
Select storage for saving for manual recording.
Schedule Record
Select storage for saving for schedule recording.
A
B
C D
E
D E
F
C
B
Summary of Contents for Ipela NSR-1050H
Page 138: ......
