91
Configuring Alarm Output Settings
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
Sensor Input Pin List
This displays a list of the sensor input pins configured for
the device selected in the tree structure.
Enable
Select the check boxes to enable the pins for the sensor
inputs.
To use sensor inputs, the sensor input pin settings on
the device must also be enabled.
No
This displays the numbers of the sensor input pins.
This item cannot be changed.
Name
Enter the names of the sensor inputs.
Pulse
Enter the duration in milliseconds to sustain pulse
input once it is turned on.
If pulses of short duration persist and there is a high
frequency of on/off switching as a result of this
configuration, multiple inputs may be grouped
together as one pulse.
Invert
Select the check box to invert the pulse polarity.
Example: Invert ON
→
OFF to OFF
→
ON.
Add
This adds a logical sensor input pin to the list.
This item is only displayed for the logical sensor inputs of
“System IO.”
Delete
This deletes the selected sensor input pin from the list.
This item is only displayed for the logical sensor inputs of
“System IO.”
Configuring Alarm Output
Settings
You can configure settings related to the alarm outputs
incorporated in NSR and cameras, and Barionet (Barix I/O
box) alarm outputs.
Outputs are used to transmit alarms to devices equipped
with alarm input functions, such as warning lamps and
door opening devices.
Example of Alarm Outputs:
Warning siren, warning lamp, light, door, etc.
You can configure the following settings for alarm
outputs.
•
“Changing Settings of Alarm Output Pins of NSR”
(page 91)
•
“Changing Settings of Alarm Output Pins of Camera”
(page 92)
•
“Changing Settings of Alarm Output Pins of Barionet”
(page 92)
Changing Settings of Alarm Output
Pins of NSR
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Open [IO Device] in the [Device] tree, and click to
select [System I/O].
Caution
Summary of Contents for Ipela NSR-1050H
Page 138: ......
