110
Starting a Connection by Calling a Remote Party
To connect to the remote party by entering all the telephone numbers for the
ISDN lines used
If the system of the remote party is not equipped with the bonding function, entering
one remote party’s telephone number does not allow automatic connection of
multiple ISDN lines used to connect to the remote party. To connect to the remote
party by entering all the telephone numbers, register the remote party’s telephone
numbers for the ISDN lines to be used referring to “Registering a Remote Party –
Phone Book”
(
)
, then connect to the remote party according to the
procedure described in “Calling a Remote Party Registered in the Phone Book”
(page 106).
4
Press the CONNECT (
) button on the Remote Commander, or use the
V
,
v
,
B
or
b
button to select “Connect” in the lower part of the menu, then
press the ENTER button on the Remote Commander.
The system begins dialing the IP address or ISDN telephone number
entered in step 3. “Dialing” appears on the monitor screen.
When the system connects to the remote system, the message “Session
Connected.” appears on the screen, and the picture on the remote site is
displayed. Now you can start communication with the remote party.
To cancel dialing before connecting
While “Dialing” is displayed on the monitor screen, press the DISCONNECT
(
) button or the ENTER button on the Remote Commander.
To save the entered IP address or ISDN telephone number in the
Phone Book
When you enter the IP address or ISDN telephone number, the Save button
appears at the lower part of the menu.
Select “Save” with the
V
,
v
,
B
or
b
button, then press the ENTER button on
the Remote Commander. The List Edit menu is displayed. Save the address or
number you entered into the Phone Book.
For details on the List Edit menu, see “Registering a Remote Party – Phone
Book” on page 114.
Redial function
Once you have input the IP address or ISDN telephone number using the
Detailed Dial menu, it will be entered in the text box of the Detailed Dial menu
the next time you open the menu.
The redial function is not available:
• Once you have turned off the power of the system or set it to standby mode.
• When you cancel dialing the entered IP address or ISDN telephone number.
Note
Note
Summary of Contents for Ipela PCS-G60
Page 253: ...Sony Corporation ...
