220
On-Screen Messages
On-Screen Messages
Check the following if a message appears on the TV monitor when operating
the Communication System.
Message
Cannot complete connection. (The following code and message appear.)
0
Unknown network error: Try again later.
1
Number does not exist: Check the number and try again.
2
Network congestion: Try again later.
3
Try again later.
16
Normal disconnection: (The line has been disconnected normally.)
17
Line is busy: Try again later.
18,19 System not responding: Check if the remote system is connected.
20
No such subscriber: Confirm the site number.
21
Call rejected: Check if the remote system is connected.
22
Called party number changed: Check the number and try again.
26
Connection restoration request: Try again later.
27
Remote system out of order: Check if the remote system is operational.
28
Invalid number entered: Check the number and try again.
31, 41 – 43, 47
Network not available: Try again later.
33, 34
Line is busy. Try to dial again later.
44
Network not available: Line is busy. Try again later.
50
Not a Subscriber: Check the remote party’s facility contract.
57,58 Bearer capability not authorized: Check if “Restrict” is set correctly.
70
Restricted capability: Set “Restrict” to “56K” and try again.
88
Terminal attribute error: Check the connection of the remote system.
91, 95 – 102, 111
Protocol error: Turn off and restart the system and try again.
128
H.221 negotiation timeout: Restart the system and connect again.
131
Board mismatch: Check the optional line interface boards.
132
Invalid SPID: Reregister the SPID.
134
Physical link synchronization error: Check the connection of the ISDN cable.
144, 145
The remote terminal may not be compatible with the BONDING function.
177
LAN connection timeout: Try again later.
Summary of Contents for Ipela PCS-G60
Page 253: ...Sony Corporation ...
