60
Registering Local Information
The Answer setup menu is used to set up call
reception.
Answer
Auto Answer
Allows you to select whether the system
answers calls automatically.
On:
Answers calls automatically. When a
call comes in, the line is automatically
connected.
Off:
Allows you to answer calls manually.
When a call comes in, the phone rings. If
you select “OK” in the “Answer?”
message, the line is connected.
ISDN MSN
Allows you to select whether you are using
the Multiple Subscriber Number.
Off:
Select when you do not use the
Multiple Subscriber Number.
On:
Select when you use the Multiple
Subscriber Number.
Mic on Answer
Allows you to select whether to transmit
audio from your site when you receive a call
and connect it.
On:
Enables transmission of audio when
answering a call.
Off:
Disables transmission of audio when
answering a call.
Reject Answer
Allows you to select whether to connect a
remote party’s calling during
communication.
On:
Disables the connection of a remote
party.
Off:
Enables the connection of a remote
party.
For details, see “Turning Off the Sound
Momentarily – Muting Function” on page
125.
The Multipoint setup menu is used to set up
multipoint connection
when the local
system is used as the main terminal
.
The menu is displayed only when the PCSA-
MCG80 HD MCU software is installed in
the Communication System.
For the procedure how to install the PCSA-
MCG80 software, see page 179.
Multipoint
Multipoint Mode
AUTO:
Switches from point-to-point
connection to multipoint connection
automatically.
On:
Enables you to make a multipoint
connection at any time.
Broadcast Mode
Allows you to select the broadcast mode.
Split:
Displays the picture from the
connected terminals in split windows.
Voice Activate:
Detects the terminal where
a speaker has the loudest voice, and
automatically transmits the picture of
this terminal to all other terminals.
Split
Allows you to select the type of split display
used to display local and remote pictures on
a single monitor during a multipoint
connection.
Automatic:
When there are two or three
terminals connected, the display is
automatically split into four parts. When
there are four or five terminals
connected, it is split into six parts.
Six-screen Mosaic:
The display is split into
six parts regardless of the number of
terminals connected.
When there is only one terminal connected, the
display switches to full screen regardless of the
selection of the setting.
Answer Setup Menu
Answer
Multipoint Setup Menu
Note
Multipoint
Summary of Contents for Ipela PCS-G60
Page 253: ...Sony Corporation ...
