97
Setting Up the Network Configurations
Cha
p
te
r
2:
Re
gis
trat
io
n
and Se
tu
p
fo
r Sys
tem Admin
ist
rat
o
rs
When using PPPoE, you can connect via LAN without a router.
A modem (using bridge mode) is required when using FLET’S ADSL.
Configuration example
1
Set “PPPoE” to “LAN” under the PPPoE page in the LAN setup menu, and
enter the PPPoE user name and PPPoE password given to you by the
provider.
2
If you have a fixed IP from the provider, set “Fixed IP for PPPoE” to “On”,
and enter your fixed IP address for PPPoE in “Fixed IP Address for
PPPoE” under the PPPoE page in the LAN setup menu.
The setting has been configured properly if the correct IP address appears
in the Home menu.
If the fixed DNS server address is specified by the provider, set “DNS” to
“Specify”, and enter the specific addresses in “Primary DNS” and “Secondary
DNS”.
3
Remote parties must configure in the same way.
To connect to a remote party
Select “IP” under “Line I/F”, enter the remote party’s IP address, and dial.
LAN Connection Using PPPoE
Note
/
/
ONU
211.10.10.10
B FLET’S
B FLET’S
ONU
210.10.10.10
Local IP
network
Internet
Setup
PPPoE
LAN
PPPoE
User Alias
Password
Fixed IP for PPPoE
Fixed IP Address for PPPoE
DNS
Primary DNS
Secondary DNS
Sony@aaa.ne.jp
On
Cancel
Save
Obtain automatically
abcdefg
On
210. 10. 10. 10
LAN1
Summary of Contents for Ipela PCS-G60
Page 253: ...Sony Corporation ...
