65
Registering Local Information
Cha
p
te
r
2:
Re
gis
trat
io
n
and Se
tu
p
fo
r Sys
tem Admin
ist
rat
o
rs
Lip Sync
Allows you to select whether to use the
Lip
Sync
function.
Auto:
Enables the Lip Sync function.
Off:
Disables the Lip Sync function.
• When “Adaptive Rate Control (ARC)”,
“Packet Resend Request (ARQ)” or
“Forward Error Correction (FEC)” is set to
“On” in the QoS setup menu, you cannot set
“Lip Sync” to “Off”.
• When “Lip Sync” is set to “Off”, you cannot
change the setting for “Adaptive Rate
Control (ARC)”, “Packet Resend Request
(ARQ)” or “Forward Error Correction
(FEC)” in the QoS setup menu.
Recording Mute
When you connect an audio recording
device to the AUDIO IN and REC OUT
jacks to record audio, this function reduces
oscillations in sound that occur due to loop-
back within audio recording device.
Off:
Disables the recording mute function.
On:
Enables the recording mute function.
• When “Recording Mute” is set to “On”, only
signals from external equipment are affected.
Signals from the microphones or remote sites
are not affected. Therefore, the Recording
Mute functions only when “Audio Input” is
set to “AUX” or “MIC+AUX.”
• When connecting an audio recording device
to the AUDIO IN and REC OUT jacks, set
“Recording Mute” to “On” and record the
sound only from the audio recording device.
If you want to record the sound on your site
as well, also use the microphone input.
Input Mode
Allows you to select the input audio mode.
Stereo:
Inputs audio to the R/L jacks of the
audio input as stereo left and right
sounds.
Monaural:
Inputs audio to the R/L jacks of
the audio input as monaural sound.
Output Mode
Allows you to select the output audio mode.
Stereo:
Outputs audio from the AUDIO
OUT R/L or HDMI OUT jacks as stereo
left and right sounds.
Monaural:
Outputs audio from the AUDIO
OUT R/L or HDMI OUT jacks as
monaural sound.
Basic Setup2
AUX Local Monitor Out
Allows you to select whether the audio input
from the AUDIO IN jacks outputs to the
audio output jacks on the Communication
System.
On:
Enables output from the audio output.
Off:
Disables output from the audio output.
Reversed MIC Inputs
Allows you to select whether to transmit the
audio input from the microphone with right
and left reversed. If you select “On”, you can
match the right and left of the camera image
and audio.
Off:
Transmits the audio with right and left
not reversed.
On:
Transmits the audio with right and left
reversed.
Audio Input Delay Setting
Allows you to set Audio Input Delay to
synchronize the audio with the video input.
Default –100ms:
Selects the default delay
minus 100ms.
Default –50ms:
Selects the default delay
minus 50ms.
Default:
Selects the default delay.
D 50ms:
Selects the default delay
plus 50ms.
D 100ms:
Selects the default delay
plus 100ms.
Custom:
Uses the Audio Input Delay you
set.
Audio Input Delay
When you set “Audio Input Delay Setting”
to “Custom”, you can set the delay time of
the input audio to match the image and
audio.
Audio Output Delay Setting
Allows you to set Audio Output Delay to
synchronize the audio with the video output.
Notes
Notes
Audio2
Summary of Contents for Ipela PCS-G60
Page 253: ...Sony Corporation ...
