74
Registering Local Information
Protocol
Allows you to select the protocol of the
ISDN lines to be used. You can select
National ISDN, Japan (NTT), Euro ISDN,
Euro ISDN (France), 5ESS (P-P), or DMS-
100, depending on the interface that you are
using.
For customers in the USA and Canada, see
“SPID Settings for Customers in the USA
and Canada” on page 74.
Telephone
Number
Enter the area code and local number in the
text boxes corresponding to the port
numbers on the ISDN unit.
The text boxes correspond to the port
numbers on the ISDN unit in the following
way.
A1:
Port 1 on the ISDN unit.
A2:
Port 1 on the ISDN unit.
B1:
Port 2 on the ISDN unit.
B2:
Port 2 on the ISDN unit.
C1:
Port 3 on the ISDN unit.
C2:
Port 3 on the ISDN unit.
Area Code
Enter the area code of the ISDN line to be
used. Do not enter the first 0 of the area code.
Local Number
Enter the line number (local number) of the
ISDN line to be used.
• When you select an empty field and then
press the ENTER button of the Remote
Commander, the setting of the previous field
is copied into the selected field.
• When using the PCSA-B768S ISDN Unit,
selecting the ISDN3 button displays the D1
to F2 text boxes. Fill in the D1 to F2 text
boxes according to the lines that you are
using.
Sub Address
The A1 to C2 (or A1 to F2) fields appear.
Sub Address
Enter sub-addresses when registering them.
Sub-addresses can only be composed of
numbers.
SPID
The SPID (Service Profile Identifier) pages
are used only for customers in the USA and
Canada.
For details, see “SPID Settings for
Customers in the USA and Canada” on page
74.
SPID
The A1 to C2 (or A1 to F2) fields appear.
Enter SPID (Service Profile Identifier).
Auto SPID
When you select “Auto SPID”, you can
automatically set up the Area Code and
Local Number on the Telephone Number
page and SPID items.
If you connect to an ISDN switch type,
configuration of SPID (Service Profile
Identifier) is required.
If “Auto SPID” is not available in your area,
set up SPID manually using the ISDN setup
menu.
1
Open the Basic Setup page of the
ISDN setup menu.
2
Enter the country code in the Country/
Region Code text box depending on
the network switch type you are using.
AT&T 5ESS (National ISDN), NTI
DMS-100 (National ISDN):
Enter “1”.
AT&T 5ESS (Point-to-Point Custom
ISDN):
Enter “1*12”.
NTI DMS-100 (Custom ISDN):
Enter
“1*11”.
3
Open the Telephone Number page to
enter the LDN (Local Directory
Notes
ISDN2
ISDN4
SPID Settings for Customers
in the USA and Canada
ISDN5
Summary of Contents for Ipela PCS-G60
Page 253: ...Sony Corporation ...
