127
Sending Audio/Video from the External Equipment to a Remote Party
C
hap
te
r 4:
C
o
n
nec
tio
n
W
ith
O
p
tion
al
Equ
ip
m
ent
Side by Side mode
In PandP or Side by Side mode, the left picture is fixed to the RGB picture, and
the right picture can be switched by pressing the PRESENTATION button.
To input audio
Set “Input Select” to “AUX” or “MIC + AUX” on Page 1/3 of the Audio Setup
menu. (See page 41.)
When set to “AUX”, the sound from the external equipment is input and the
sound from microphones is deactivated. When set to “MIC + AUX”, both
sounds are input.
To switch the audio input from external equipment connected to the AUDIO
IN AUX1 connectors, AUDIO IN AUX2 jacks, HD SDI1 connector or HD
SDI2 connector, select “AUX1”, “AUX2” or “HD SDI” under “AUDIO IN”
on Page 1/3 of the Audio Setup menu. (See page 41.)
The selected input is displayed upper left on the monitor screen.
To Switch Input Video and Input Audio simultaneously
Set “Link to Audio Input” to “On” on “Video Input” page of Video Setup
Menu (page 43) so as to link the audio you want to switch simultaneously with
the video input.
When the video input is switched, the audio input is automatically switched to
the one linked to the video input.
RGB picture
HD-SDI 1, HD-SDI 2 or S-Video picture
