138
Starting a Multipoint Connection
To call remote parties by selecting them from the Detailed Dial menu
The operations to call remote parties not registered in the Phone Book are the
same as those for a peer-to-peer connection.
For details, see “To call a remote party by selecting them from the Detailed
Dial menu.” on page 81.
1
Select “Detailed Dial” in the launcher menu to open the Detailed Dial
menu.
2
Select “Multipoint“ under “Dial Mode”.
3
Set up the line data of the remote parties.
1
Enter the IP addresses of all the parties for the multipoint connection in
text boxes A to C.
2
Select the Communication Bit Rate between the party and yourself in
“Communication Bit Rate”.
For details on the setups, see “To call a remote party by selecting them
from the Detailed Dial menu.” on page 81.
4
Select “Dial”, and press the PUSH ENTER button on the Remote
Commander. You can also press the CONNECT/DISCONNECT (
/
)
button on the Remote Commander.
The system begins dialing the numbers selected in step 3. “Dialing” appears on
the monitor screen.
Detailed Dial
Cancel
Save
Dial
2005.12.28 12:34
Multipoint
Dial Mode
2 Mbps
Communication Bit Rate
A
B
C
More options
Detailed Dial
Cancel
Save
Dial
2005.12.28 12:34
Multipoint
Dial Mode
2 Mbps
Communication Bit Rate
A
B
C
123.123.123.1
123.123.123.2
123.123.123.3
More options
