29
Setting Up the System for the First Time — Initial Setup Wizard
C
h
apt
er
1:
In
st
al
la
tio
n
an
d Pr
e
p
a
ra
tio
n
Setting Up the
System for the First
Time — Initial Setup
Wizard
When you turn on the Communication
Terminal for the first time after installation
and the self-diagnosis is completed, the
setup wizard appears on the monitor screen.
Set your local system data with the setup
wizard using the Remote Commander.
You can change the settings made with the
setup wizard later.
1
Use the
V
or
v
button on the Remote
Commander to select the language
used for the on-screen menus and
messages in the Language Setup
Wizard.
Language:
Select one of the following
languages: English, French, German,
Japanese, Spanish, Italian, Simplified
Chinese, Portuguese, Traditional
Chinese, Korean, or Russian.
2
Use the
V
,
v
,
B
or
b
button on the
Remote Commander to select “Next”,
then press the PUSH ENTER button.
The LAN Setup Wizard appears.
3
Set the following items on the LAN.
DHCP Mode
Sets the DHCP (Dynamic Host
Configuration Protocol).
Auto:
Automatically assigns your IP
address, network mask, gateway
address and DNS address.
Off:
Deactivates DHCP. In this case set
your IP address, network mask,
gateway address and DNS address
manually.
Host Name
Enter your host name (up to 30
characters).
IP Address
Enter your IP address.
Network Mask
Enter your network mask.
Gateway Address
Enter your default gateway address.
DNS Address
Enter your DNS (Domain Name
System) server address.
When you set “DHCP Mode” to “Auto”,
the assigned IP address is shown in the
launcher menu (page 54) or Machine
Information menu (page 59).
If you do not know how to set up the LAN
configuration, contact your network
administrator.
4
Use the
V
,
v
,
B
or
b
button to select
“Save”, then press the PUSH ENTER
button.
The settings are saved.
To cancel the setting
Press the
V
,
v
,
B
or
b
button to select
“Cancel”, then press the PUSH ENTER
button.
To go back to the previous wizard
Press the
V
,
v
,
B
or
b
button to select
“Previous”, then press the PUSH ENTER
button.
Language Setup Wizard
Cancel
Next
2005.12.28 12:34
English
Language
LAN Setup Wizard
Cancel
Next
Previous
2005.12.28 12:34
Host Name
Auto
.
.
.
.
.
.
.
.
.
.
.
.
DHCP Mode
Network Mask
IP Address
DNS Address
Gateway Address
Note
Cancel
Previous
Save
Save Setup?
