93
Adjusting the Sound
C
h
a
p
te
r 3:
B
a
si
c
C
o
nn
ect
ion
You can turn off the sound to be sent to a remote party when you have
answered a call from the remote party.
If you set “Mic on Answer” to “Off” in the Answer menu, only the picture on
the local party will be sent to the remote party when answering a call. The
indicator appears on the monitor screen.
For the “Mic on Answer” setting, see “Answer Menu” on page 37.
To send the sound to the remote party
Press the MIC ON/OFF button on the Remote Commander.
The Communication Terminal is equipped with the Echo Canceler, allowing
the echo that occurs during audio transmission to be reduced.
Setting “Echo Canceler” to “On” in the Audio Setup menu activates the built-
in echo canceler.
When using an external echo canceler, set “Echo Canceler” to “Off”.
For the “Echo Canceler” setting, see “Audio Setup Menu” on page 42.
The Echo Canceler is effective for the microphones connected to the AUDIO IN MIC
connectors or the MIC A1/A3 jacks only.
Turning Off the Sound On Answering – Mic on Answer Function
Reducing Echo – Echo Canceler
Note
Audio Setup
2005.12.28 12:34
3/4
Echo Canceler
Page:
Audio Output Delay
Recording Mute
Cancel
Save
On
Audio Output Delay Setting
Default
On
AUX Local Monitor Out
REC OUT Mode
Off
Monoral 2ch
