186
“Memory Stick” Media
Adjust room lighting so that it falls on the
participants. Avoid direct light on the TV
monitor. Light intensity on faces should be
about 300 lux or more.
If an inverter type or brightness-adjustable
type of fluorescent lamp is used, the
sensitivity of the Remote Commander may
deteriorate.
“Memory Stick”
Media
Notes on using “Memory Stick”
media
• When you set the “Memory Stick” erasure
prevention switch to “LOCK”, data cannot
be recorded, edited, or deleted.
The position and shape of the write-protect
switch may differ between the various
types of “Memory Stick”.
• Do not remove the “Memory Stick” while
it is reading or writing data.
• Data may be damaged if:
– The “Memory Stick” is removed or the
unit is turned off while reading or
writing.
– You use the “Memory Stick” in a
location subject to the effects of static
electricity or electric noise.
• We recommend that you back up
important data recorded on the “Memory
Stick”.
• Do not affix anything other than the
supplied label to the “Memory Stick” label
area.
• Affix the label so that it does not stick out
beyond the label area.
• When storing or carrying a “Memory
Stick”, keep it in its original case.
• Do not touch the terminal of the “Memory
Stick” with anything, including your
fingers or metallic objects.
• Do not strike, bend, or drop the “Memory
Stick”.
• Do not disassemble or modify the
“Memory Stick”.
• Do not allow the “Memory Stick” to get
wet.
Terminal
Erasure
prevention
switch
Label area
