170
Using a Second Camera
Using a Second Camera
You can connect the second camera through the PCSA-CXG80 Camera Unit.
Connection example for a second camera
Connect the video output connector on the second camera to the VIDEO IN
YPbPr jacks on the front of the Communication System or the S VIDEO IN or
RGB IN connector at the rear.
Select “YPbPr”, “S-VIDEO” or “RGB” in “Second Camera Input” of the
Camera setup menu depending on the connector to which the camera is
connected.
To switch the picture shot by two cameras
When you open the Camera menu, the instruction “F2: Switches to the first
camera.” or “F2: Switches to the second camera.” is displayed at the bottom of
the monitor screen. Each press of the F2 button on the Remote Commander
changes the picture shot by each camera.
For the procedure how to open the Camera menu, see “Adjusting the Camera”
on page 134.
TERMINAL
VISCA OUT
/
OPEN
VIDEO IN
AUDIO 2 IN
MAINTENANCE
Y
Pb
Pr
L
R
VISCA cable
(not supplied)
to VISCA OUT
to VISCA IN
Second camera
to Video
output
(YPbPr)
Video cable (not supplied)
to VIDEO IN
YPbPr
First camera (PCSA-CXG80)
Summary of Contents for Ipela PCS-XG80
Page 266: ...Sony Corporation ...
