187
Connection Examples of a Multipoint Connection
C
h
ap
te
r 6:
M
u
lti
p
oi
nt
C
onn
ec
tion
Installing the optional PCSA-MCG80 HD MCU software in an HD Visual
Communication System allows you to connect to multiple systems up to six by
using the optional PCSA-B768S, or up to four by using the optional PCSA-
B384S ISDN Unit.
Notes on the number of ISDN lines used and number of remote
parties for a multipoint connection
You can select the number of ISDN channels to be used for the remote point
connected first using “ISDN Bandwidth” on the ISDN: Mode page of the
Communication setup menu (page 68).
However, if the number of remote points connected increases as a result of
dialing from the main terminal, some of the channels used for the first point
will be cut off and used for newly connected points instead. For example,
if you use six ISDN lines (up to 12B channels available), 12B channels will be
used for the first remote point only when no other points are connected. When
the system connects to a second point, the number of channels for the first
point decreases, and 6B channels will be used for both the first and second
points.
Even if one of the remote points in a multipoint connection is disconnected, the
number of channels used for the remaining points will not increase.
Using the ISDN Connection
/
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
The illustration shows an example using the
PCSA-B768S ISDN Unit.
PCSA-MCG80 HD
MCU software
PCSA-B384 or PCSA-
B768S ISDN Unit
to ISDN1 to 6
to ISDN lines
ISDN modular cables
(not supplied)
Summary of Contents for Ipela PCS-XG80
Page 266: ...Sony Corporation ...
