69
Registering Local Information
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
Restrict
Allows you to select the ISDN transmission
rate.
Auto:
Select when connecting a remote
party via a normal ISDN line.
56K:
Select when connecting a remote party
located in a region or country where the
ISDN transmission rate is 56 Kbps.
The system is set to connect an ISDN line at the
transmission rate of 64 Kbps by default.
However, some countries, such as the USA,
and some regions may use the ISDN
transmission rate of 64 Kbps and 56 Kbps. You
may not communicate with such countries or
regions at 64 Kbps, so you must therefore set
“Restrict” to “56K” before dialing.
Screen Size
Allows you to select the screen size of the
picture to be transmitted or received.
You can select from among W4CIF,
W432P, WCIF, 4CIF, CIF and AUTO.
Video Mode
Allows you to select the compression format
of pictures to be transmitted or received.
You can select from among H.261, H.263+,
and H.264.
Video Frame
Allows you to select the number of video
frames during transmission or reception.
15fps:
Send CIF format pictures at a
maximum rate of 15 frames per second.
30fps:
Send CIF format pictures at a
maximum rate of 30 frames per second.
AUTO:
Switch the number of frames
automatically.
SIP: Mode
Communication Bit Rate
Allows you to select the communication bit
rate per point
You can select from among 128Kbps,
384Kbps, 512Kbps, 1Mbps, 2Mbps, 3Mbps,
4Mbps, 5Mbps, 6Mbps, 7Mbps, 8Mbps,
9Mbps, 10Mbps and Other.
Audio Mode
Allows you to select the compression format
of audio to be sent to a remote party.
You can select from among G.728, G.722
and G.711.
When the remote system does not support the
audio mode selected by the local site, the mode
automatically becomes “G.711”.
Far End Camera Control
Allows you to select whether to enable the
control of each other’s cameras from each
other’s site.
On:
Enables the control of each other’s
cameras. Normally, set to “On”.
Off:
Disables the control of each other’s
cameras.
Screen Size
Allows you to select the screen size of the
picture to be transmitted or received.
You can select from among 720, W4CIF,
W432P, WCIF, 4CIF, CIF, QCIF and
AUTO.
Video Mode
Allows you to select the compression format
of pictures to be transmitted or received.
You can select from among H.261, H.263+,
H.264 and MPEG4.
Video Frame
Allows you to select the number of video
frames during transmission or reception.
15fps:
Send CIF format pictures at a
maximum rate of 15 frames per second.
30fps:
Send CIF format pictures at a
maximum rate of 30 frames per second.
60fps:
Send CIF format pictures at a
maximum rate of 60 frames per second.
AUTO:
Switch the number of frames
automatically.
The Audio setup menu is used to set various
audio items.
Note
Communication
Note
Audio Setup Menu
Summary of Contents for Ipela PCS-XG80
Page 266: ...Sony Corporation ...
