100
Setting Up the Network Configurations
To connect to a remote party
Select “IP” under “Line I/F”, enter the user name or user number set by the
remote party, and dial.
Connection using NAT allows one IP address to be shared by several
computers on the same LAN. This section describes how to set up visual
communication in NAT and global IP environments.
Configuration example
1
Enter a name in “Host Name” under the Basic Setup page in the LAN setup
menu, and enter the appropriate values for “IP Address”, “Network Mask”,
and “Gateway Address”.
2
Set “NAT Mode” to “On” in the NAT Setup page of the LAN setup menu,
and enter the appropriate IP address in “WAN IP Address”.
LAN Connection through NAT (LAN1 Only)
/
/
Internet
210.10.10.1
210.20.20.2
(Global address)
192.100.10.10
192.100.10.1
210.20.20.1
Router
Router
Setup
Basic Setup
LAN
Host Name
DHCP Mode
IP Address
Network Mask
Gateway Address
Primary DNS
Secondary DNS
LAN Mode
Auto
Off
Sony
192.100. 10. 10
255.255.255. 0
192.100. 10. 1
Cancel
Save
LAN1
Summary of Contents for Ipela PCS-XG80
Page 266: ...Sony Corporation ...
