117
Receiving a Call from a Remote Party
C
h
a
p
te
r 3:
B
a
si
c
C
o
nn
ect
ion
Receiving a Call from a Remote Party
Operations for answering a call differ depending on the setting of the answer
mode.
Auto answer mode
The system automatically receives a call from a remote party and you can start
connecting. Although no operation is necessary to start, the picture on the local
site will be displayed on the remote site screen even if you are not ready to
begin.
Manual answer mode
When there is an incoming call, the Communication System rings. You need
to connect the call manually.
You can start connecting when you are ready.
• You cannot answer the call unless the power switch on the Communication System is
on.
• Make sure that the TV monitor is turned on.
For setting of the answer mode, see “Auto Answer” in the Answer setup menu
on page 65.
To answer a call in auto answer mode
When you receive a call, the Communication System rings and the message
“Answering...” appears on the monitor screen. The system is automatically
connected and the picture of the remote party is displayed on the local monitor
screen and the sound is heard. The picture and sound on the local site will be
enabled on the remote site at the same time.
The message “Session Connected.” appears on the monitor screen.
You are now ready to start communication.
Notes
Answering a Call from a Remote Party
Picture on the remote site
Picture on the local site
Summary of Contents for Ipela PCS-XG80
Page 266: ...Sony Corporation ...
