background image

Ot
he
rs

Glossary

27

5

Click 

Start Upgrading

.

Upgrading starts.

Notes

• To stop upgrading, click 

Stop upgrading

To protect some devices, during the process of 
upgrading, upgrading cannot be canceled.

• Do not turn off the power until the device restarts after 

upgrading.

• While upgrading a connected camera, do not upgrade 

this unit.

Glossary

Default gateway

Device that can be used to access another network.

DHCP server

Acronym for Dynamic Host Configuration Protocol 
server. The IP address of a terminal without an 
individual IP address can be automatically distributed by 
the Dynamic Host Configuration Protocol (DHCP). The 
DHCP server assigns the IP addresses to the terminals.

Digital certificate

An electronic certificate that a CA (Certificate 
Authority) attests that a public key to cancel a secret 
code is issued by an authentic publisher.

DNS server

Acronym for Domain Name System server. As an IP 
address required for connecting to the device on an IP 
network is numerical and difficult to remember, the 
Domain Name System was established. A domain name 
is alphabetic and is easier to remember. When a client 
computer uses a domain name to connect to another 
computer, it asks a DNS server to translate the name into 
the corresponding IP address. The client computer can 
then obtain the IP address of the computer to be 
connected.

HTTP port

A port used to communicate between the web server and 
the web client, such as a web browser.

IP address

Acronym for Internet Protocol Address. An individual 
IP address is basically assigned to each piece of 
equipment connected to the Internet.

MAC address

A network address that uniquely identifies each LAN 
card.

Network address

The portion that identifies the local network (subnet) in 
an IP address.

Primary DNS server

One of the DNS servers that can first reply to a request 
by connected devices or other DNS servers.

Summary of Contents for Ipela SNCA-ZX104






























Reviews: