8. The video conference unit will dial the
selected location and you will see the following
screen.
9. Once connection has been made you will see
the far side on the projector and the near
location on the lcd monitor.
12. If you wish to see the camera from this end,
press the “
PnP
” button. This will cycle through
the various picture-in-picture locations (one of
the 4 corners, or none).
11. If you are using the polycom as your audio
source along with video conferencing, you will
need to mute the microphones on the video
conference unit by pressing the “
MIC ON/
OFF
” button. When the mic is off at this end, a
“
MIC OFF
” icon will appear on the screen.
10. To add in more locations, press the
“
CONNECT/DISCONNECT
” button, and
repeat the steps of looking thru the phonebook
and connecting the location.
13. Use the volume control on the Sony remote to increase or decrease
the audio level from the other sites. If you are not hearing any audio,
ensure the audio amp is turned on, and the ‘
VidCon
’ volume control
and ’
Master
’ volume control are turned up. Also, check with the other
party to makes sure their mics are not turned off.
Page 2
Summary of Contents for Ipels PCS-G50
Page 8: ...Page 8 ...
Page 9: ...Page 9 ...