Connecting a Laptop to a Projection Unit
1. Turn the projection unit on and check it is on
“computer”
input by pressing the
“source”
button on the remote.
2. Connect the laptop to the projector with the VGA cable or by docking the unit.
3. Turn the laptop on - the computer should automatically sense it is hooked up to the projector and your screen resolution may
change.
4. If you don’t see the image on the screen, you may have to change the settings on the computer to output the image at the correct
resolution.
1. Right Click on
the desktop
2. Select “
Graphics
Options
”
3. Select “
Output To
Dual Display Clone
”
4. Select “
No
Monitor
”
You should now see your image on the screen.
If you do not see your image, press “Fn” + “F8” at the same time to scroll thru the display options of displaying the image on just the
laptop, just the projector, or both.
If you don’t see the image (get sync error) or if you see the image, but the ratio is off or the image does not fill the screen, you may
have to do a couple of more adjustments:
1. Right Click on
the desktop & se-
lect “
Graphic
Properties
”
2. Select “
Display Set-
tings
” and change to
“
1024x768
”
3. Select “
Aspect
Ratio Options
”
4. Select “
Full
Screen
”, select “
OK
”,
then click on “
Apply
”.
You should see the
image full screen.
If you still do not see the image, call Media Services (623-0503) or the help desk (627-8519).
Page 7
Summary of Contents for Ipels PCS-G50
Page 8: ...Page 8 ...
Page 9: ...Page 9 ...