5
Recommended Measures to Secure the TV
Consider the following measures when securing your TV to a
Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately support the weight of the
TV. Use two angle braces (not supplied) to secure the stand. For
each angle brace use the appropriate hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.
2
Secure the TV to the Stand.
Use the optional hardware listed as follows (not supplied):
• M6 machine screw (screwed into the TV’s rear cover)
• A screw or similar (attach it to the Stand)
• Rope or chain (strong enough to support the weight of the
TV). Make sure that there is no excess slack in the rope or
chain.
The length of the M6 machine screw differs depending on the
rope or chain diameter. Please see below illustration.
3
Anchor the TV to the wall by using bolts, wall anchor and chain
(or rope).
Please see below illustration for M6 eye bolt length.
Note
• Securing the TV to the stand without securing the TV and the
stand to the wall provides minimum protection against the TV
toppling over. For further protection, be sure to follow the three
measures recommended.
Angle braces
(not supplied)
Stand
Screw hole on the rear cover
M6 machine screw
(not supplied)
Rope or chain (not supplied)
Screw (not supplied)
8-12 mm
Screw M6
TV’s rear cover
Rope or chain
2
1
M6 eye bolts (not supplied)
Wall-mount holes
Rope or
chain (not
supplied)
Wall-anchor
(not supplied)
8-12 mm
M6 eye bolt
TV’s rear cover
