32
MANUAL PROGRAMME PRESET
This option allows you to:
a)
Preset channels or the VCR channel one by one to the programme order of your choice.
To do this:
1
Once you have entered the “Set Up”menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press
OK
. Next with
Programme
option highlighted press
OK
.
Press
v
or
V
to select which programme number you want to preset the channel on (for VCR, select
programme number “0”). Then press
B
.
2
After selecting the
Channel Number
option, press
OK
. Then press the number buttons to enter directly the
channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel
number, press
b
and
v
or
V
to search for it. When you have tuned the desired channel, press
OK
twice to
store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this:
Once you have entered the “Set Up”menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press
OK
. Next with the
Programme
option, highlighted press the
PROG +/-
button
to select the programme number with the channel you wish to name. When the programme you want to name
appears on the screen, press
v
or
V
to select the
Label
option and press
OK
. Then, with the first element
highlighted, press
v
,
V
,
B
or
b
to select the letter, next press
OK
. When you have finished, press
v
,
V
,
B
or
b
to select the word “
End
” on the screen and finally press
OK
to turn off the menu from the screen. Finally press
OK
to store.
• To correct a letter, select "
%
" on the screen to go back and press
OK
.
• For a blank, select " " on the screen and press
OK
.
c)
Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture,
however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the “Set Up” menu
as it is explained on page 30 and after selecting the "Manual Programme" option, press
OK
. Then press
v
or
V
to select the
AFT
option and press
b
. Next press
v
or
V
to adjust the fine tuning between -15 and +15. Finally
press
OK
twice to store.
d)
Skip any unwanted programme numbers when they are selected with the
PROG +/-
buttons.
To do this:
Once you have entered the "Set Up" menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press
OK
. Next with the
Programme
option highlighted, press the
PROG +/-
button
to select the programme number you want to skip. When the programme you want to skip appears on the screen,
press
v
or
V
to select the
Skip
option and press
b
. Next press
v
or
V
to select
On
. Finally press
OK
twice to
confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
continued...
TV Functions
01GBKEP37XS1.fm Page 32 Tuesday, March 30, 2004 8:57 AM