52
Viewing pictures from equipment connected to the TV
1
Connect your equipment to the designated TV socket, as indicated on page 50.
2
Switch on the connected equipment.
3
To watch the picture from the connected equipment, press the
button repeatedly until the
correct input symbol appears on the screen.
Symbol Input Signals
1
• Audio / video input signal through the Scart connector
I
1
• RGB input signal through the Scart connector
I
. This symbol appears only if
an RGB source has been connected.
2
• Audio / video input signal through the Scart connector
J
.
2
• RGB input signal through the Scart connector
J
. This symbol appears only if
an RGB source has been connected.
3
• Audio/video input signal through the Scart connector
K
.
3
• S Video Input signal through the Scart connector
K
. This symbol appears only
if an S Video source has been connected.
4
• Component input signal through the Y, P
B
/C
B
, P
R
/C
R
jacks
H
and audio input
signal through
G
.
5
• Video input signal through the phono socket
B
and Audio input signal through
C
.
5
• S Video Input signal through the side S Video input jack
A
and Audio signal
through
C
. This symbol appears only if an S Video source has been connected.
4
Press the
button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the side of the TV and select
5 or
5
input signal using the instructions above. Next, refer to the “Sound Adjustment” section of this
manual and set “Dual Sound” option to “A” on the sound menu screen (see page 24).
S
S
S
Additional Information
01GBKEP37XS1.fm Page 52 Tuesday, March 30, 2004 8:57 AM
