Connecting the TV
36
KDF-E55/60A20
2-593-962-
11
(3)
DVD Player with
Component
Video Connectors
Use this hookup if:
❑
Your DVD player has component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1
Use a component video cable to connect the DVD player’s Y, B-Y and
R-Y jacks to the TV’s YP
B
P
R
jacks. Use the HD/DVD IN 4 or 5
connections.
2
Use an audio cable to connect the DVD player’s AUDIO OUT jacks to
the TV’s AUDIO IN jacks. Be sure to use the same row of inputs that
you used for the video connection (HD/DVD IN 4 or 5).
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
✍
The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled
Y, C
B
and C
R
, or YP
b
P
r
. If so, connect the cables to like colors.
Y
P
B
P
L
R
HD/DVD IN
(1080i/720p/
480p/480i)
4
5
R
AUDIO
Component video cable
(not supplied)
Rear of TV
Audio cable (not supplied)
DVD player
AUDIO-R (red)
AUDIO-L (white)
Y
P
B
P
R
✍
To take advantage of the Wide Mode feature on your TV, set the DVD
player’s aspect ratio to 16:9. For details, refer to the operating
instructions supplied with your DVD player.
