Introducing WEGA GATE
55
Intr
o
duc
in
g W
E
GA GATE
KDF-E55/60A20
2-593-962-
11
(3)
Using Antenna in WEGA GATE
The Antenna feature takes you to the most recently viewed channel on the
antenna input. When tuned to the channel, the Program Banner and Channel
number will be displayed.
Select Antenna from the WEGA GATE control panel and press
.
Using External Inputs in WEGA GATE
The
External Inputs
feature lets you view from a selected external input
connected to your TV. You can assign a label or skip over unused inputs by
selecting
Edit Video Labels
. Input label assignment can also be done by
going to
Setup
settings and select
Label Video Inputs
1
Select
External Inputs
from the
WEGA GATE
control panel and press
.
The External Inputs list appears. Make your selection.
2
Press
M
/
m
to highlight the desired external input and press
.
Using Settings in WEGA GATE
The
Settings
feature lets you enter to the menu screen where most of
advanced settings and adjustments are performed (see page 56).
✍
If you have not completed the initial channel setup (see page 64) both
Cable and Antenna will tune to the lowest channel number. To run Auto
Program see page 64.
Full Focus
Sd Film Festivals Growth
0:29 Remaining
720p 16:9
KPBS-HD
Unrated
15.1
6:29PM
External Inputs
Exit
Video 1 VHS
Video 2
Video 3
Video 4
Video 5
Video 6
Edit Video Labels
