5
(GB)
SU-WL51
2-652-380-11(1)
Be sure to tighten the screws
securely in the designated position.
If you fail to do so, the TV or monitor may fall, and cause
bodily injury to someone or damage to the TV or monitor.
Be careful not to subject the TV or
monitor to shock during installation.
If the TV or monitor is exposed to shock, it may fall or break
apart. This may cause injury.
Be sure to install the TV or monitor
on a wall that is both perpendicular
and flat.
If you fail to do so, the TV or monitor may fall and cause
injury.
After proper installation of the TV or
monitor, secure the cables properly.
If people or objects get tangled with cables, this may result in
injury or damage to the TV or monitor.
Do not allow the AC power cord or
the connecting cable to be pinched.
If the AC power cord or the connecting
cable is pinched between the unit and the
wall or is bent or twisted by force, the
internal conductors may become exposed
and cause a short circuit or an electrical
break. This may cause a fire or an electric
shock.
Be careful not to hurt your hands or
fingers during the installation.
Be careful not to hurt your hands or fingers when installing
the Wall-Mount Bracket or the TV or monitor.
The screws needed to secure the
Wall-Mount Bracket to the wall are
not supplied.
Use the appropriate screws for the wall material and structure
when mounting the Wall-Mount Bracket.
Before installation
If you intend to install a TV or monitor that is not
specified on page 2, be sure to refer to the leaflet
“Installing the Wall-Mount Bracket” supplied with your
TV or monitor.
Step 1:
Checking the parts
required for the
installation
1
Prepare four or more M8 or
equivalent screws (not supplied)
and a screwdriver. Select screws
suitable for the material of the
wall.
2
Unpack the carton and check to
see that all the following items
are included.
Plate Unit (1)
Mounting Hook Unit (2)
Paper Template (1)
Screw (+B6 × L20) (2)
Screw (+PSW5 × L16) (6)
Hook (4)
01GB01COV.book Page 5 Tuesday, December 20, 2005 4:59 PM