12
KDL-46V4100
KDL-46V4100
2 times
5 times
LED ON 0.3 sec.
LED OFF 0.3 sec.
LED OFF
3 sec.
Viewing the Self Check Diagnostic List
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
DISPLAY
Channel
5
Volume
-
TV POWER .
The Self Check list displays.
This differs from accessing Service Adjustments.
Results for all of the following diagnostic items are displayed on screen. No error has occurred if the screen displays a “0”.
NOTE: If the Self Check display text is not completely visible, press the Menu HOME button on the Remote Commander to refresh the display.
3. Press the Channel 1 button on the Remote Commander to go to Page 2 of the Self Check list.
SELF CHECK
PAGE 1
002 MAIN_POWER
01
Í
1 indicates an error was detected
003 DC_ALERT1
00
Í
0 indicates no error was detected
005 PANEL_ALERT
00
006 BACKLIGHT
00
013 BACKLIGHT_BALANCE
00
00001 00027 00009 00000
SELF CHECK
PAGE 2
007 TEMP
00
008 SP_PROT
00
011 TRIDENT_IC
00
012 HFR_ERROR
00
012 TCON_ERROR
00
00001 00027 00009 00000
4. Press the Channel 4 button on the Remote Commander to go back to Page 1 of the Self Check list.
5. To exit Self Check display, turn the power off.
Clearing the Self Check Diagnostic List
1. In Service Mode, press the Channel 8
Channel
0 .
