17
KDL-46V4100
KDL-46V4100
1 Slide out Speaker (L) unit from Bezel
2 Slide out Speaker (R) unit from Bezel
3 Remove 2 screws from Under Bar
4 Disconnect 1 connector and Slide out H3E Board from Clear Panel
5 Release hooks and remove from Bezel
6 Remove 1 screw and release hooks from Clear Panel
7 Disconnect 1 connector and Slide out H4 Board from Light Guide
1-8
SPEAKERS, UNDER BAR, H4 BOARD AND LIGHT GUIDE REMOVAL
Bezel
LCD Panel
1
2
Speaker Unit (L)
Speaker Unit (R)
Light Guide
Under Bar
H3E Board
Bezel
Clear Panel
1
3
2
5
4
6
7
1-9. LCD
PANEL
REMOVAL
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration on Page 32.
1 Disconnect 2 connectors
2 Remove 2 screws
