18
KDL-46V4100
KDL-46V4100
1
Cover
Balancer Board
LCD Panel
2
1-10. BALANCER (ETC-INVERTER MT) BOARD REMOVAL
1 Remove 7 screws
2 Pull out the board from Lamp Socket
BALANCER (ETC-INVERTER) BOARD REMOVAL
WARNING
NEVER REMOVE THE
SCREWS SECURING THE
PLASTIC STRIP HOLDING
THE LAMP SOCKETS
DAMAGE TO THE
BACKLIGHT TUBES WILL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement.
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
!
.
OCCUR!
END VIEW
SOCKET
REMOVE SCREWS
SECURING
SHIELD
SHIELD REMOVAL