3.
Display the content to watch in 3D on the TV screen.
4.
Put the Active 3D Glasses on.
While watching a 3D image, the (Power) indicator blinks green every 2 seconds.
If no 3D effect is achieved, perform the following steps.
5.
Press the 3D button to display the [3D Display] screen.
(When using the Touchpad Remote Control, press the Control Bar (
), slide the touchpad to
highlight the 3D button, then press the touchpad to select.)
6.
Press the 3D button repeatedly to select the [3D Display] mode to suit the displayed content.
(When using the Touchpad Remote Control, press the Control Bar (
), slide the touchpad to
highlight the 3D button, press the touchpad, slide the touchpad to highlight the desired [3D
Display] mode, then press the touchpad.)
[3D (Side-by-Side)]: Displays side-by-side pictures in 3D.
[3D (Over-Under)]: Displays over-under pictures in 3D.
[3D (Simulated 3D)]: Displays regular 2D pictures in simulated 3D.
[2D (Left-Only)]: When the same picture is side-by-side, the left side picture is shown expanded,
in 2D.
[2D (Top-Only)]: When the same picture is over-under, the upper picture is shown expanded, in
2D.
Depending on the input signal or format, [3D (Side-by-Side)]/[3D (Over-Under)]/[2D (Left-
Only)]/[2D (Top-Only)] may not be selectable.
To turn off the Active 3D Glasses
Press down on the (power) button of the Active 3D Glasses for 2 seconds. If no signal from the
TV is detected for more than 1 minute, the Active 3D Glasses will turn off automatically. To turn
them on again, press the (power) button.
To use the Active 3D Glasses with another TV
It is required to re-register the Active 3D Glasses. Turn off the Active 3D Glasses, then perform
step 2.
To deactivate the 3D effect
Press the 3D button repeatedly to select [Off] in [3D Display].
(When using the Touchpad Remote Control, press the Control Bar (
), slide the touchpad to
highlight the 3D button, press the touchpad, slide the touchpad to highlight [Off] in [3D Display],
then press the touchpad.)
To adjust the 3D settings
You can adjust the following 3D settings.
Press the HOME button, select
[Settings] →
[Display] → [3D Settings] → the desired
option.
[3D Display]
Opens [3D Display] to switch the display modes.
[3D Depth Adjustment]
Adjusts the depth of 3D pictures on the screen (available only for content with 3D signals). You
can manually set the adjustment value.
[Simulated 3D Effect]
Heightens/lessens the 3D effect when you display 2D pictures in simulated 3D.
[3D Glasses Brightness]
Sets the image brightness when using the 3D display mode. By selecting [Auto], image
brightness through the Active 3D Glasses is automatically adjusted in conjunction with the
[Picture Mode] setting.
[Auto 3D]
Summary of Contents for KDL-50W705B
Page 1: ...Top Page KDL 50W706B KDL 50W705B List of Contents 2014 Sony Corporation ...
Page 51: ...List of Contents 2014 Sony Corporation ...
Page 100: ...Optimal picture for viewing tables and characters List of Contents 2014 Sony Corporation ...
