29
GB
Usin
g MENU
Fu
nction
s
KLV-40/37/32S310A
3-271-680-
12
(1)
Channel Set-up menu
You can select the options listed below on the
“Channel Set-up” menu. To select options in
“Settings”, refer to “Navigating through menus”
(page 18).
1 Digit Direct
When “1 Digit Direct” is set to “On”, you can select a channel using one preset
number button (0 - 9) on the remote.
~
When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering
two digits using the remote.
Auto Tuning
Tunes in all the available channels.
This option allows you to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters.
Programme Sorting
Changes the order in which the channels are stored on the TV.
1
Press
F
/
f
to select the channel you want to move to a new position, then
press .
2
Press
F
/
f
to select the new position for your channel, then press
.
Programme Labels
Assigns a channel name of your choice up to five letters or numbers. The name will
be displayed briefly on the screen when the channel is selected.
1
Press
F
/
f
to select the channel you want to name, then press
.
2
Press
F
/
f
to select the desired letter or number (“_” for a blank space),
then press
g
.
If you input a wrong character
Press
G
/
g
to select the wrong character. Then, press
F
/
f
to select the correct
character.
To delete all the characters
Select “Reset”, then press
.
3
Repeat the procedure in step 2 until the name is completed.
4
Select “OK”, then press
.
Programme Block
Blocks an individual channel from being watched.
1
Press
F
/
f
to select the channel you want to block, then press
.
2
Press
F
/
f
to select “Block”, then press
.
To watch the channel, select “Allow”.
Continued
010COV.book Page 29 Tuesday, September 18, 2007 8:59 AM
