24
GB
Brightness
Brightens or darkens the picture.
Colour
Increases or decreases colour intensity.
Hue
Increases or decreases the green tones and red tones.
~
“Hue” can only be adjusted for an NTSC colour system (e.g. U.S.A. video tapes).
Colour Temperature
Adjusts the whiteness of the picture.
“Cool”:
Gives the white colours a blue tint.
“Neutral”:
Gives the white colours a neutral tint.
“Warm 1”/“Warm 2”:
Gives the white colours a red tint. “Warm 2” gives a redder
tint than “Warm 1”.
z
“Warm 1” and “Warm 2” are not available when “Picture Mode” is set to “Vivid”.
Sharpness
Sharpens or softens the picture.
Noise Reduction
Reduces the picture noise (snowy picture) in a weak broadcast signal.
“High”/“Medium”/“Low”:
Modifies the effect of the noise reduction.
“Off”:
Turns off the “Noise Reduction” feature.
MPEG Noise Reduction
Reduces the picture noise in MPEG-compressed video.
Advanced Settings
Customizes the Picture function in more detail. When you set “Picture Mode” to
“Vivid”, you cannot set/change these settings.
“Reset”:
Resets all the advanced settings to the factory settings.
“Black Corrector”:
Enhances black areas of the picture for stronger contrast.
“Adv. Contrast Enhancer”:
Automatically adjusts “Backlight” and “Picture” to
the most suitable settings judging from the brightness of the screen. This setting is
especially effective for dark images scenes. It will increase the contrast distinction
of the darker picture scenes.
“Gamma”:
Adjusts the balance between bright and dark areas of the picture.
“Clear White”:
Emphasizes white colours.
“Live Colour”:
Makes colours more vivid.
“Colour Space”:
Changes the colour reproduction gamut. “Wide” reproduces the
vivid colour and “Standard” reproduces the standard colour.
~
“Colour Space” is not available for KLV-32W400A.
