D846660B279CC0D5520DEF8E80C6FD0B0509C3DE5F2E1AA689414F35FDFA3F98261139660559AE28
KLV-70X300A (CH) 6
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to
reveal past problems and how often these problems occur.
1-1. DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY LED will flash a set number of times to indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
Number of times STANDBY LED
Monitoring Items
Diagnostic Item Description
(Red) flashes
(Screen Display)
2 times
POW OVP
Main Power Over Voltage Protection
3 times
POW ERR1
Power Error
5 times
T_CON
T_CON Error
6 times
BACKLITE
Back Light Error
7 times
PANL TEMP
Temperature Abnormal Detection
8 times
AUD PROT
Audio Abnormal Detection
9 times
FAN_ERR
FAN Error
10 times
DTT ERR
DTAU Power (Not used)
13 times
BALANCER
Panel Balancer Error (Not used)
1-2. DISPLAY OF STANDBY LED FLASH COUNT
1-3. STOPPING THE STANDBY FLASH
Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY LED from flashing.
SELF DIAGNOSIS FUNCTION
2 times
4 times
5 times
LED ON 0.3 sec.
LED OFF 0.3 sec.
LED OFF
3 sec.
[ FLASH COUNT ]
Note: One flash counts is not self-diagnostic.
STANDBY
INDICATOR
