Operations
39
-EN
EN
Operating video
equipment
You can operate a piece of video equipment that has an
infrared remote sensor with the supplied remote
commander. Before operating, set the manufacturer’s
code number.
Setting the manufacturer’s code
While holding down CODE SET, press 0 – 9 to
enter the manufacturer’s code number (see the
chart on page 35) and press ENTER. For
example, to operate a Sony 8 mm VCR, press 0,
2 and ENTER.
To turn off the captions or text
Press DISPLAY on the remote commander.
Each time you press DISPLAY, the display changes as
follows:
on-screen information
n
XDS*
n
Caption Vision or Text
“DISPLAY OFF” goes off after three seconds.
* Some programs are broadcast with XDS service which shows a
network name, program name, program length, call letters and
time of the show. When you select XDS with the DISPLAY
button, this information will be displayed on the screen if the
broadcaster offers this service.
Note
• Captions may appear with a white box or another error instead
of a certain word. Poor reception of TV programs can also
cause errors in Closed Caption.
DISPLAY OFF
MODE
Low position
0–9 buttons
CODE SET
ENTER
(continued)
CODE SET
0
2
ENTER
