39
Channel
Skip/Add
Skips unnecessary
channels.
Auto Program
Automatic
channel presetting
Cable
Cable system
setting
After AUTO SET UP, you can erase unnecessary
channels from the channel preset memory.
With the Channel Skip/Add window open:
1 Move the joystick up or down to select the desired
channel. You can view the channel that is selected
with the Channel Skip/Add menu in the sub screen.
You can also use CH +/– or 0–9 and ENTER
buttons.
2 Press
.
3 Move the joystick up or down to select Skip, and press
.
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
Add.
Select Yes to signal the projection TV to automatically program all receivable
channels. When all the receivable channels are stored, the lowest numbered
channel is displayed.
Select No to cancel Auto Program.
Select On if your projection TV is connected to a cable system.
Select Off if your projection TV is connected to an antenna.
C h a n n e l S k i p / A d d
Select a channel
2 :
3 :
4 :
5 :
6 :
7 :
8 :
1 :
Move
Select
Exit
MENU
9 :
S k i p
S k i p
A d d
A d d
A d d
A d d
A d d
A d d
A d d
ch
