86
Adjusting Your Setup (MENU)
Changing the “Setup” setting (continued)
Adjusting the convergence manually
1
After selecting
“Convergence”, move
up or down to select
“Manual Adjust”, then
press
.
The cross pattern appears
on the screen.
2
Move
up, down, left
or right to adjust the red
lines until they converge
with the green lines, then
press
.
3
Move
up, down, left
or right to adjust the blue
lines until they converge
with the center cross
pattern, then press
.
To return to the normal screen
Press MENU.
Tip
• Selecting “Digital Quick Focus” under “Convergence” allows you to
adjust the convergence automatically. When the Digital Quick Focus
feature is performed, manual adjustment values are erased.
Notes
• Adjust convergence about 20 – 30 minutes after the projection TV is first
turned on.
• You cannot use the
2
+/– buttons on the projection TV for manual
convergence adjustment.
TW
IN
PRO
G+
TWIN PROG
–
TW
IN
PRO
G+
TWIN PROG
–
Adjust : Next Color :
TW
IN
PRO
G+
TWIN PROG
–
TW
IN
PRO
G+
TWIN PROG
–
TW
IN
PRO
G+
TWIN PROG
–
TW
IN
PRO
G+
TWIN PROG
–
Adjust : Finish :