Sony KV-21CL10U, Instruction Manual

master page=right

7

KV-21CL10U_Grp U12_GB

4-093-929-

61

(1)

GB

Switching On the TV and Automatically Tuning

 The first time you switch on your TV, a sequence of menu screens appear on the TV 

enabling you to: 1) choose the language of the menu screen, 2) search and store all available 
channels (TV Broadcast), 3) change the order in which the channels (TV Broadcast) appear 
on the screen and 4) adjust the picture slant.
However, if you need to change any of these settings at a later date, you can do that by
selecting the appropriate option in the 

 (Set Up) or 

(Channel Set Up) menu.

1

Connect the TV plug to the mains socket (220-240 V AC, 50 Hz). 
Press 

!

 On/Off button on the TV set to switch on the TV. The 

first time you switch on the TV, a 

Language

 menu displays 

automatically on the TV screen.

2

Press 

2

 +/– button on the top control panel to select the language, 

then press 

t

 to confirm your selection. From now on all menus 

will appear in the selected language.

3

Ensure the aerial is connected as instructed, then press 

t

 to 

confirm. The TV automatically starts searching and storing all 
available broadcast channels for you. 

• This procedure could take some minutes. Please be patient 

and do not press any buttons, otherwise automatic tuning 
will not be completed.

• If no channels were found during the auto tuning process, a 

new menu appears automatically on the screen asking you 
to connect the aerial. Please connect the aerial (see page 6) 
and press 

t

. The auto tuning process will start again.

Language 

Svenska

English
Nederlands

Français

Select language

Norsk

Confirm [

t

]

Select [

–

2

+]

Do you want to start automatic

First please connect aerial

tuning?

No

Initial Set Up

Yes

Select [

–

2

+] Confirm [

t

]

Auto Tuning

No channel found

Please connect aerial

OK

Confirm [

t

] End 

[

MENU

]

First Time Operation

continued...

02GBKV21CL10U.fm  Page 7  Tuesday, June 10, 2003  11:15 AM