25
GB
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
Problem
Picture slanted
Noisy picture when viewing
a TV channel.
Remote control does not
function.
The standby indicator
on
the TV flashes.
Solution
• Using the menu system, select the “Picture Rotation” option
in the “Detail Set Up” menu to correct the picture slant (see
page 16).
• Using the menu system, select the “Manual Programme
Preset” menu and adjust Fine Tuning (AFT) to obtain better
picture reception (see page 15).
• Using the menu system, select the “Noise Reduction” option
in the “Picture Adjustment” menu and select “Auto” to
reduce the noise in the picture (see page 19).
• Check that the Media Selector on the remote control is set to
the device you are using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD even
when the Media Selector has been set correctly. Enter the
necessary code set as explained in the “Remote Control
Configuration for VCR/DVD” chapter of this instruction
manual (see page 22).
• Replace the batteries.
• Contact your nearest Sony service centre.
Additional Information
03GBKV28FQ70U.fm Page 25 Wednesday, January 15, 2003 7:55 PM