- 14 -
2-3. A Board Removal [ Step 1 ]
2-4. A Board Removal [ Step 2 ]
2-5. F3 Board Removal
2-6. Service Position
Position the chassis as indicated to access the solder side
of the PWB’s. To gain access to the A Board follow the
instructions on page 1
6
. [Removal and Replacement of the
main bracket bottom plates ].
Screw.
Release the 5 securing clips located around the side of the
chassis and slide the PWB clear of the bracket.
Remove the 3 screws securing the PWB to the main bracket.
1 can be seen in the photo above and the other 2 are either
side of the FBT assembly.
Clip.
Clip.
Release the 2 securing clips located along the side of the
chassis and slide the PWB clear of the bracket.