11
C
onnections
Connecting Additional Equipment
Connecting a TV and VCR
1
Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
❏
If your VCR is equipped with video outputs, you can get better picture quality by
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
❏
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
Using your TV with this connection
❏
Program your Sony remote control to operate your VCR (see page 5).
❏
To activate your remote, press
(FUNCTION button) to operate your VCR. In order to do
this, first program your remote control, then use the Channel Fix feature to set your TV to
channel 3 or 4 (see page 41).
❏
Press
repeatedly to switch between VCR input (VIDEO input) and VHF/UHF
(local channels).
Optional connection
1
3
4
VIDEO
L
L
(MONO)
R
S VIDEO
Y
P
B
P
R
5
AUDIO OUT
(VAR/FIX)
L
R
(MONO)
VIDEO
LINE
IN
LINE
OUT
AUDIO L AUDIO R
Audio R (red)
Video (yellow)
Audio L (white)
Rear of TV
VCR
2
1
From
cable/antenna