2
Safety Information
All TVs operate on extremely high voltages. To prevent fire or electric shock, please follow the safety procedures indicated
below.
For your safety
For General Safety
•
Do not expose the TV set to rain or moisture.
•
Do not remove the rear cover.
•
For your protection, refer all servicing to qualified personnel only.
For Safe Installation
•
Do not install the TV in hot, humid or excessively dusty places.
•
Do not block or cover the ventilation openings. For ventilation, leave a space of at least 10
cm all around the set.
•
Do not install the TV where it may be exposed to mechanical vibrations.
•
Place the TV set only on a stable stand designed for the weight and dimensions of the TV.
For Safe Operation
•
Do not operate the TV set on anything other than a 220-240V AC, 50Hz supply.
•
Do not operate the TV if any liquid or solid objects fall in through the ventilation slots.
Have it checked immediately.
•
For environmental and safety reasons, it is recommended that the TV set is not left in
standby mode when not in use. Switch off at the mains.
•
Do not disconnect the TV by pulling on the power cable. Disconnect by removing the
mains plug.
•
In case of a thunderstorm, disconnect the TV set from the main supply and the aerial.
Otherwise the set may be damaged by a stroke of lightning.
For Maintenance
•
Clean the TV screen with a soft dampened cloth. Do not use any abrasive cleaners.
•
Dust and nicotine deposits may cause heat accumulation inside the TV set. In the long term
this could be a safety risk and may shorten the lifetime of your TV set. Therefore have your
set serviced about every five years.