background image

Getting started

6

5

 

Automatically tuning the TV

Note:

If you need to re-enter the ‘Automatic Tuning’ procedure at any time, you can do so by pressing
the Auto Start up button (refer to page 7) 

1.

When you switch on the TV for the first time, the Sony logo appears on
the TV screen followed by the ‘Memory Stick’ logo, then the Language/
Country menu with the word ‘English’ highlighted. Press the 

V

 or 

v

buttons on the remote control to choose the language you require then
press the 

OK

 button to confirm.

2.

The word Country is now highlighted. Press the 

V

 or 

v

 buttons to choose

the country in which you are using the TV. It is important to select the
correct country to ensure correct Teletext displays. Press the 

OK

 button

to confirm your choice.

The picture rotation prompt appears. Sometimes the Earth’s natural
magnetism can cause the screen to look tilted.

a)

If no correction is required, press the 

OK

 button.

b)

If some correction is required, press the 

V

 or 

v

 button to rotate the

picture over a range of -5 to +5. Press the 

OK

 button to store.

The picture centering prompt appears. This allows you to adjust the
vertical position of the display if it is not centralised.

a)

If no correction is required, press the 

OK

 button.

b)

If some correction is required, press the 

V

 or 

v

 button to set the new

position. Press the 

OK

 button to store.

The autotune prompt screen appears. Press the 

OK

 button to select 

Yes

.

The autotune procedure begins, tuning all the available channels. A
display then appears on the TV screen to inform you of the tuning
progress.

If no channels are found, a display appears on screen asking you to
confirm your aerial is connected. Check the aerial is connected correctly
then press the 

OK

 button to repeat the tuning process.

Once tuning is complete, the ‘Programme Sorting’ prompt appears. If you
wish to change the order of the stored channels, press the 

OK

 button

and refer to page 20 for instructions. If you do not wish to sort the
channels at this time, press the 

MENU

 button to return to normal

operation.

3.

To view programmes, press the 

PROG+/-

 button or the numbered

buttons on the remote control.

6

 

Finding your video channel

If you connected a VCR to your TV when following the ‘Connecting an aerial and a
VCR to the TV’ instructions, you now need to find your video channel.

1.

Press the 

PROG+/-

 button on the remote control until the picture from the

pre-recorded tape appears on screen.

Notes:

If you wish to move your video channel to a different programme number, refer to
‘Programme Sorting’ on page 20.

If you have connected your VCR using a scart lead, press the 

/

 button

repeatedly on the remote control until the picture from the pre-recorded tape
appears on the TV screen.

Autotune prompt

Language/Country menu

GBpages1-8.fm  Page 6  Tuesday, October 28, 2003  3:23 PM

Summary of Contents for KV-32HQ100B

































Reviews: