— 29 —
KV-32XBR200/KV-36XBR200
BACKGROUND POSITION ADJUSTMENT
(BGHP, BGVP)
NOTE: Prior to this adjustment, the P&P ACQUISITION
ADJUSTMENT must be performed (see previous page).
1. Input a monoscope signal.
2. Set VIDEO mode = STANDARD.
3. Freeze a main picture.
4. Set to Service Mode and select BGHP (pp), BGVP (pp) with
and
.
5. Adjust with
and
for the best center.
6. Write into the memory by pressing
then
.
FREEZED
•NEED TO ADJUST AFTER P&P (MAIN)
ACQUISITION ADJUST
A–B =
±
0.2 sg
C–D =
±
0.2 sg
A
B
C
D
P&P WHITE BALANCE ADJUSTMENT
(MUPE, MVPE, IUPE, IVPE)
1. Input a 40 IRE white signal.
2. Set to VIDEO mode = STANDARD.
3. Set to P&P mode.
4. Set to Service Mode and select MUPE MVPE (main
window), IUPE IVPE (sub window) with
and
.
5. Adjust with
and
for white balance.
6. Write into the memory by pressing
then
.
NEED TO ADJUST AFTER
MAIN PICTURE (NOT P&P)
W/B ADJUST
SUB WINDOW
MAIN WINDOW
*9300 degrees K +8 MPCD
P&P OSD ADJUSTMENT (PDPS)
1. Input a monoscope signal.
2. Set to channel INDEX mode.
3. Adjust so right side edge of P&P OSD is 1 ~ 2 characters
from border.
ADJUST……PDPS (OP)
If necessary, adjust
PDP 0
PDP 1
PDP 2
4. Push the P&P off.
5. Push the return key for favorite channel.
6. Confirm 1 ~ 2 characters distance.
7. Write the memory by pressing
then
.
1
⁄
2CHAR
1
⁄
2CHAR
1
⁄
2CHAR
1
⁄
2CHAR 1
⁄
2CHAR 1
⁄
2CHAR 1
⁄
2CHAR
2
2
2
3
3
4
4
5
: CRT Usable Area.
OSD POSITION ADJUSTMENT (DISP)
1. Input a color bar signal.
2. Set to Service adjustment Mode.
3. Select DISP with
and
.
4. Adjust with
and
for the bar center.
5. Write into the memory by pressing
then
.
SERVICE VP AFC 0
1000 0000
|||||||||||||||------------
