18
Setting Up the Headphones
Install the supplied size AA (R6) battery into
the headphones.
1
Open the battery compartment lid by
pressing and sliding the lid as illustrated.
2
Lift the cover and insert the battery into
the compartment with the positive side up
and then close the lid.
Notes
• When used continuously, the battery will last:
— up to 40 hours with alkaline batteries.
— up to 20 hours with manganese batteries.
• Replace the battery with a new one when the
sound becomes weak.
Using the Headphones
1
Press
.
The
2
icon and channel number are
displayed.
2
Turn the power on by placing the
headphones securely on your head.
If you only want to listen to the sound from
the cordless headphones, turn down the TV
speaker volume, or press MUTING.
3
To turn off the headphones, remove them
from your head and press
.
Tip
z
For optimal sound reception, do not cover the infrared
transmitter on the TV or the infrared sensors on the
headphones.
Notes
• To help prevent possible hearing damage
due to sudden or prolonged excessive
volume, do not set the headphone
volume too high while using them.
• To prevent possible damage to the
infrared transmitter in the television,
please press the
to turn off the
headphone feature when the headphones
are not in use.
Using the Wireless Headphones
MENU
GUIDE
VOL
TV/SAT
CH
SWAP
MODE
PICTURE
MODE
Infrared sensors
Infrared transmitter
Power indicator
Volume control
Summary of Contents for KV-32XBR250 - 32" Fd Trinitron Wega Xbr
Page 46: ...Printed in U S A ...