background image

– 11 –

KV-HA21M80/HA21N70/HA21N80

RM-969

RM-968

Selecting the space sound mode

Press SPACE SOUND.

Select

To

“ON”

listen to monaural sound with a stereo-like effect.

“OFF”

turn off space sound mode.

Note

• You can also turn space sound on or off using the SELECT and + or – buttons.

Customizing the picture and sound (continued)

K

Customizing the picture and sound

(KV-HA21M80)
You can customize the picture and sound by selecting the picture and sound
modes or by adjusting its settings.

You can change the sound effect by selecting the space sound mode.

Selecting the picture mode

  Press PIC MODE to select the desired picture
  mode.

Select

To

“DYNAMIC”

view high contrast pictures.

“STANDARD”

view normal contrast pictures.

“SOFT”

view mild pictures.

Selecting the sound mode

  Press SOUND MODE to select the desired sound
  mode.

Select

To

DYNAMIC”

listen to dynamic and clear
sound that emphasizes the low
and high sound.

DRAMA”

listen to sound that emphasizes
vocals and background music.

SOFT”

listen to soft sound.

Adjusting the picture and sound settings

1

Press SELECT until the desired setting appears.

Each time you press SELECT, the setting item will change as follows:

2

Press + or – to adjust the item.

3

To adjust other items, repeat steps 1 to 2.

Notes

• “HUE” can be adjusted for the NTSC color system only.
• Reducing “SHARP” can also reduce picture noise.

SOUND

MODE

PIC MODE

SELECT

+ or –

PICTURE

COLOR

BRIGHT

HUE

BALANCE

TREBLE

BASS

SHARP

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

PROGR

2

 

SPACE 
SOUND

SPACE

SOUND

Summary of Contents for KV-HA21N70





























































Reviews: