60
SELECT OUT
Output signal
selection from
SELECT OUT
You can select the desired output signal from the
SELECT OUT jacks on the upper panel at the rear.
MONITOR: Select to edit tapes while monitoring.
SELECTOUT outputs the picture displayed on the
screen.
Note:
• With this setting, the picture input from VIDEO 5
IN or digital TV programs is not output from
SELECT OUT.
VIDEO1–VIDEO4: Select to edit tapes while viewing an input image different
from that being recorded. SELECT OUT outputs the signal input to the
projection TV regardless of the displayed picture on the screen.
TV OUT: Select if you connect an AV receiver to VIDEO 1 IN. SELECT OUT
outputs the signal that the TV is tuned to, regardless of the displayed picture.
(see “Connecting an AV receiver” on page 17 for connection)
If you select TV OUT, the following pop-up menu appears.
Note:
• With this setting, digital TV signal is not output
from SELECT OUT.
Select YES only if you have connected an AV
receiver, with no other equipment, to your projection
TV. You can always select the signal from the
receiver by pressing TV/VIDEO once.
Note:
• If you select YES, you cannot view a digital TV program as SELECT OUT
does not output a digital TV signal to the receiver.
Select NO if you have connected multiple components to your projection TV.
You can select an input (VIDEO1 – VIDEO4) with the TV/VIDEO button.
FREEZE MODE:
Move
Select
Exit
MENU
SET UP
PARENTAL CONTROL
CAPTION VISION:
LANGUAGE:
SELECT OUT:
VIDEO LABEL
DIRECT PLAY
CC1
VIDEO1
MONITOR
VIDEO2
VIDEO3
VIDEO4
TV OUT
Using Conventional TV Features (continued)
FREEZE MODE:
Move
Select
Exit
MENU
SET UP
PARENTAL CONTROL
CAPTION VISION:
LANGUAGE:
SELECT OUT:
VIDEO LABEL
DIRECT PLAY
CC1
VIDEO1
MONITOR
VIDEO2
VIDEO3
VIDEO4
TV OUT
Set up using YES
only VIDEO1 input? NO
