77
Noisy picture (when DRC is set to HIGH in
the VIDEO menu)
•
Soften the sharpness using SHARPNESS in
the VIDEO menu.
TV is fixed to one channel
•
Use AUTO PROGRAM to add receivable
channels that are not presently in
conventional TV’s memory. (see “AUTO
PROGRAM” on page 54)
•
Try turning CHANNEL FIX off.
(see “CHANNEL FIX” on page 56)
Double images or ghosts
•
Use a highly directional outdoor antenna or a
cable (when the problem is caused by
reflections from nearby mountains or tall
buildings).
Cannot operate the menu
•
If the item you want to choose appears in
gray, you cannot select it.
•
Press the projection TV’s power button off
and on again.
Cannot receive any channels when using
cable TV
•
Make sure CABLE is ON in the CHANNEL
SET UP menu. (see “CABLE” on page 54)
•
Use AUTO PROGRAM to add receivable
channels that are not presently in the TV’s
memory. (see “AUTO PROGRAM” on page
54)
Cannot gain enough volume when using a
cable box
•
Increase the volume at the cable box. Then
press TV (FUNCTION) and adjust the
projection TV’s volume.
Projection TV malfunctions when using the S-
Link function
•
Make sure the projection TV’s power cord is
connected securely to the wall outlet.
•
Check the S-Link connection. (see “Using the
S-Link/CONTROL S Function” on page 20)
CHANNEL INDEX does not display all
available channels
•
Make sure CABLE is ON in the CHANNEL
SET UP menu. (see “CABLE” on page 54)
•
Use AUTO PROGRAM to add receivable
channels that are not presently in the TV’s
memory. (see “AUTO PROGRAM” on page
54)
FAVORITE CHANNEL does not display your
choices
•
Verify that FAVORITE CHANNEL is set to
MANUAL in the CHANNEL SET UP menu.
(see “Setting FAVORITE CHANNEL manually”
on page 57)
Some video sources do not appear when you
press TV/VIDEO
•
Ensure that VIDEO LABEL is not set to SKIP.
(see “VIDEO LABEL” on page 61)
Recording through SELECT OUT does not
function properly when recording in PIP or
P&P mode
•
SELECT OUT will not record both images in
PIP or P&P. Only the main picture will be
recorded.
•
If you are recording the main picture and you
switch to the sound of the sub picture using
the AUDIO button, the main picture will be
recorded with sound from the other program.
Cannot play shooting games
•
Some shooting games which involve pointing
a light beam at the TV screen with an
electronic gun or rifle cannot be used with
this projection TV. For details, see the
instruction manual supplied with the video
game software.
The picture blurs
•
Press AUTO FOCUS on the projection TV.
(see “Adjusting the Convergence
Automatically (AUTO FOCUS)” on page 27)
Convergence is not adjusted correctly even
though you performed AUTO FOCUS
•
Press AUTO FOCUS on the projection TV
again. (see “Adjusting the Convergence
Automatically (AUTO FOCUS)” on page 27)
