53
AUTO WIDE
Automatically
selects the wide
screen mode
WIDE MODE
Manually selects
the wide screen
mode
V CENTER
Adjusts the
position of the
picture
Using the WIDE SCREEN
MODE Menu
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 46.
To select the WIDE SCREEN MODE
Menu:
Display
/
Highlight
/
Select
To restore the factory settings
Press RESET on the remote control while the
WIDE SCREEN MODE menu is selected.
Select ON to automatically display the picture with an ID-1 or S1 (aspect ratio
recorded) signal in an optimum wide screen mode; normal 4:3 picture in
NORMAL, letterbox picture in ZOOM, and 4:3 squeezed picture in FULL.
Select OFF if you want to choose the wide screen mode manually by pressing
the WIDE MODE button.
You can select NORMAL, WIDE ZOOM, ZOOM or FULL for the 4:3 or
letterbox picture to fill the 16:9 screen manually by pressing the WIDE MODE
button. (for details on each mode, see “Using the Wide Screen Mode” on page
39)
Allows you to move the picture vertically within the screen (available only in
ZOOM and WIDE ZOOM modes).
Move the joystick up or down to move the picture, and press
.
MENU
WIDE SCREEN MODE
AUTO WIDE : ON
WIDE MODE : NORMAL
V CENTER : 0
Move
Select
Exit
MENU
